Key Features
- Frequency Range 1 - 26 GHz
- Gain 15.5 dB
- Noise Figure 1.8 dB @ 10 GHz
- P1dB 15 dBm
- Supply Single
- Supply Positive
Applications
- Wideband Receivers
- Telecommunication
- Test and Measurement
- SATCOM
- SDR
Architecture
ATEK161 Block Diagram
ATEK161 is a wideband low noise amplifier covering 1 to 26 GHz frequency range. Amplifier can be used up to 32 GHz. ATEK161 provides flat gain and low noise over wideband with single supply voltage. This allows users to easily realize wideband receiver frontends. RF input and output matched to 50 ohms internally. Evaluation Board and bare die options are available upon request.
Technical Specifications
| Parameter | Condition | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Frequency Range | 1 | 32 | GHz | ||
| Gain | 1 GHz | 14.5 | dB | ||
| 4 GHz | 16 | dB | |||
| 12 GHz | 15.4 | dB | |||
| 18 GHz | 15.5 | dB | |||
| 26 GHz | 15.8 | dB | |||
| Noise Figure | 1 GHz | 4.2 | dB | ||
| 4 GHz | 3.2 | dB | |||
| 12 GHz | 1.7 | dB | |||
| 18 GHz | 2.4 | dB | |||
| 26 GHz | 3.3 | dB | |||
| Isolation | 1 GHz | 53 | dB | ||
| 4 GHz | 50 | dB | |||
| 12 GHz | 31 | dB | |||
| 18 GHz | 29 | dB | |||
| 26 GHz | 26 | dB | |||
| Input Return Loss | -19 | dB | |||
| Output Return Loss | -16 | dB | |||
| Output IP3 | TBD | dBm | |||
| Output P1dB | 15 | dBm | |||
| Psat | TBD | dBm | |||
| DC Supply Voltage | 5 | V | |||
| DC Supply Current | 55 | mA | |||
| Operating Temperature | -40 | 85 | °C |
Available Resources
Ready to Integrate ATEK161?
Contact our engineering team for technical support, samples, or volume pricing.
Request More Information