ATEK169P3 is a wideband low noise amplifier covering LF to 8 GHz frequency range. Amplifier can be used up to 12 GHz. Amplifier operational low frequency range can be extended to lower frequencies by increasing external component values.
ATEK169P3 provides flat gain and low noise over wideband with single supply voltage. This allows users to easily realize wideband receiver frontends.
Amplifier housed in compact 3×3 mm low cost SMD package, input and output matched to 50 ohms internally.
Evaluation Board, bare die, custom package, and module options are available upon request.
| Parameter | Min | Typ | Max | Units | |||
| Operational Frequency Range | LF | 8 | GHz | ||||
| Gain | 0.1 GHz | 18 | dB | ||||
| 1 GHz | 18 | ||||||
| 2 GHz | 17.5 | ||||||
| 4 GHz | 17 | ||||||
| 8 GHz | 15.5 | ||||||
| Noise Figure | 0.1 GHz | 1.4 | dB | ||||
| 1 GHz | 0.9 | ||||||
| 2 GHz | 1.05 | ||||||
| 4 GHz | 1.25 | ||||||
| 8 GHz | 1.4 | ||||||
| Isolation | 0.1 GHz | 23 | dB | ||||
| 1 GHz | 22.6 | ||||||
| 2 GHz | 22.4 | ||||||
| 4 GHz | 22 | ||||||
| 8 GHz | 22 | ||||||
| Input Return Loss | -17 | dB | |||||
| Output Return Loss | -13 | dB | |||||
| Output IP3 | 31 | dBm | |||||
| Output P1dB | 20.5 | dBm | |||||
| Psat | 21 | dBm | |||||
| DC Supply Voltage (Vdd) | 3.3 | 5 | V | ||||
| DC Supply Current | 40 | 75 | mA | ||||
| Operating Temperature | -40 | 85 | °C | ||||
