rev1.0 01.03.2021
ATEK150P3 is a wideband low noise amplifier covering 0.01 to 8 GHz frequency range. Amplifier operational low frequency range can be extended to lower frequencies by increasing external component values.
ATEK150P3 provides flat gain and low noise over wideband with single supply voltage. This allows users to easily realize wideband receiver frontends.
Amplifier housed in compact 3×3 mm low cost SMD package, input and output matched to 50 ohms internally.
Evaluation Board, bare die, custom package, and module options are available upon request.
| Parameter | Min | Typ | Max | Units | ||
| Operational Frequency Range | 0.01 | 8 | GHz | |||
| Gain | 0.01 GHz | 19 | dB | |||
| 1 GHz | 21 | |||||
| 3 GHz | 20.5 | |||||
| 6 GHz | 22 | |||||
| 8 GHz | 23 | |||||
| Noise Figure | 0.01 GHz | 5.5 | dB | |||
| 1 GHz | 2 | |||||
| 3 GHz | 1.3 | |||||
| 6 GHz | 1.8 | |||||
| 8 GHz | 3 | |||||
| Input Return Loss | -12 | dB | ||||
| Output Return Loss | -14 | dB | ||||
| Output P1dB | 18 | dBm | ||||
| Output IP3 | 31.5 | dBm | ||||
| DC Supply Voltage (Vdd) | 3 | 5 | V | |||
| DC Supply Current | 83 | mA | ||||
| Operating Temperature | -40 | 85 | °C | |||
